Cement Paper Bag/Sack Making Machine Production Line

Product Description

1. Brief introduction:
This machine is used for pasting valve bags bottoms automatically. It is controlled by Delta PLC, Inverter, Touching panel.
2. Technical specifications:
1). Max. Speed: 120pcs/min
2). Distance between bottoms center: 260-860mm
3). Tube width: 300-650mm
4). Tube length: 500-1200mm
5). Equipped with device for 45°forward and reverse folding at the both ends of tube, creasing at the middle of bottom and longitudinal slitting. The device is equipped with differential components, No downtime adjustment;
6). Bottom width: 80-210mm (Equipped with bottom forming device. Bottom width can be set freely in the range)
7). Equipped with valve pasting device
-- Has functions of pasting Internal sleeve valve, external sleeve valve, and reinforced valve
-- Valve paper width 130-430mm, length 150-250mm
-- Has function of pasting internal sleeve (paper + film/paper+cotton paper) composite type double layers valve. Film/cotton paper reel diameter≤600mm; valve paper reel diameter≤1300mm
8). Equipped with inline cutting device for cutting "thump gap" of external sleeve valve
9). Equipped with "s" type big wheel clamping output system. The pasted bag bottoms are clamped more tightly and for more longer time. The bag bottoms are pasted more strongly. This will reduce glue consumption and drying time.
11). Total power: 34.54kw (Totally 11sets motor, including 1set 11kw main motor, 1set 0.07kw deviation-correction motor for valve paper reel; 1set 0.75KW motor fro lifting valve paper reel; 2sets 1.1kw motors for "s" type big wheel clamping output system, 1set 0.75kw motor for bottom center distance adjustment, 2sets 0.25kw motors for discharging rejected bags, 1set 0.12kw differential automatic compensation motor for valve sleeve making machine, 1set 11kw air compressor, 1set 7.3kw vacuum pump, 1set 0.97kw air dryer.
12). Equipped with 3sets diaphragm pump for supplying glue
13). Weight: Around 48.80Tons
14). Dimension: 31.3m X 7.6m X 3.5m
15). Touch Panel: Delta
16). PLC: Delta
17). Inverter: Delta
18). Electrical cabinet for main electronics: 1set
19). Power: 380±10V  50Hz  3ф  4L  AC
20). Workshop environment: Temperature 10ºC-30ºC, RH(relative humidity)30-60%
21). Equipped with 1set air storage tank (0.8MPa  1m3)
22). Equipped with 1set 0.97kw cold type compressed air dyer
23). Equipped with 1 set vacuum pump (Ultimate vacuum mbar 0.5 300m3/h 7.3kW)
24). Equipped with 1set screw type air compressor (0.8 MPa  1.70 m3/min  11kW)
25). Basic configuration: Equipped with gears and auxiliaries for pasting one size valve